Create a display stand for the full-size Core64 by 3D-printing these files from OnShape.
The holes in the crossbar are designed to be tapped (or hot threaded) for 4-40 screws 1/4” long.
One possibility for a matching screw: https://www.mcmaster.com/91772A106/
3D Print your own hands-on Core Memory Model
Requires a few short lengths of wire and some screws to complete the assembly.
Qty 8 Screw similar to: Button Head Cap Screw 6-32 x 1 inch long (https://www.mcmaster.com/92949A153/)
Qty 2 Insulated Wires (different X and Y colors are helpful) 75mm long, 5.5mm OD
Qty 1 Insulated Wire (sense, different color than X and Y) 100mm long, 2mm OD